Accessories https://susgmbh.de/en/product-category/accessories/ Kanaltechnik und Schwingungstechnik Sun, 10 Dec 2023 12:39:27 +0000 en-US hourly 1 https://susgmbh.de/wp-content/uploads/2021/06/cropped-Favicon_4-32x32.jpg Accessories https://susgmbh.de/en/product-category/accessories/ 32 32 Pipe Repair Sealing Clamp – LONG https://susgmbh.de/en/product/pipe-repair-sealing-clamp-long/ Mon, 19 Apr 2021 12:28:13 +0000 https://susgmbh.de/product/pipe-repair-sealing-clamp-long/ Properties

  • Strong honeycomb structure of the sealing sleeve (EPDM, KTW approved) for better compensation of unevenness in the pipe
  • Length 200 - 300 mm
  • Temperature +90°C for water
  • max. Pressure 10 bar for water
  • Scope of delivery: sealing tape, bridge and threaded bolt made of stainless steel
  • easy assembly and low weight

 

Areas of application

  • a system for sealing and short-term repair of holes, cracks and porous areas in water pipes
  • suitable for steel pipe, cast iron pipe and fiber cement pipe
  • versatile

Der Beitrag Pipe Repair Sealing Clamp – LONG erschien zuerst auf SuS GmbH Schwerin.

]]> Description

Pipe repair sealing clamps are suitable for sealing water or gas pipes (note: only for gas pipes outside buildings).

Our stainless steel sealing tapes are made from 100% stainless steel 1.4301 (V2A) similar to AISI 304 and are suitable for quick and permanent repairs to broken, cracked or porous pipes. For areas of application that require higher general resistance (sewage treatment plants, chemical industry, increased chloride contents) we also offer the Maxi in V4A stainless steel quality.

The bolts are welded to the clamp so that only the stainless steel bridge is movable. It is therefore not necessary to remove elements of the stainless steel sealing strips at any time during installation. This means that no individual parts can be lost during installation.

Sealing sleeve made of EPDM for drinking water or NBR for gas (DIN DVGW) approved.

 

Data

Artikel-Nr.Durchmesser
bereich
[mm]		Baulänge

[mm]
RDS.L.106116106 - 116200
RDS.L.108118108 - 118200
RDS.L.113123113 - 123200
RDS.L.118128118 - 128200
RDS.L.132144132 - 144200
RDS.L.135145135 - 145200
RDS.L.151161151 - 161200
RDS.L.159170159 - 170200
RDS.L.106116.3106 - 116300
RDS.L.108118.3108 - 118300
RDS.L.113123.3113 - 123300
RDS.L.118128.3118 - 128300
RDS.L.125135.3125 - 135300
RDS.L.132144.3132 - 144300
RDS.L.135145.3135 - 145300
RDS.L.140152.3140 - 152300
RDS.L.159170.3159 - 170300
RDS.L.165176.3165 - 176300
RDS.L.167177.3167 - 177300

Der Beitrag Pipe Repair Sealing Clamp – LONG erschien zuerst auf SuS GmbH Schwerin.

]]> Pipe Repair Sealing Clamp – Medium https://susgmbh.de/en/product/pipe-repair-sealing-clamp-medium/ Mon, 19 Apr 2021 12:22:23 +0000 https://susgmbh.de/product/pipe-repair-sealing-clamp-medium/ Properties

  • Strong honeycomb structure of the sealing sleeve (EPDM, KTW approved) for better compensation of unevenness in the pipe
  • Length 100 mm
  • Temperature +90°C for water
  • Pressure 10 bar for water
  • Scope of delivery: sealing tape, bridge and threaded bolt made of stainless steel
  • easy assembly and low weight

 

Areas of application

  • a system for sealing and short-term repair of holes, cracks and porous areas in water pipes
  • suitable for cast iron pipe, PE pipe and PVC pipe
  • versatile
  • quick repairs of steel, cast iron and asbestos cement pipes

Der Beitrag Pipe Repair Sealing Clamp – Medium erschien zuerst auf SuS GmbH Schwerin.

]]> Description

Medium pipe repair sealing clamps are suitable for sealing holes, cracks and porous areas in water-carrying and gas-carrying pipes (attention: only for gas-carrying pipes outside buildings) with a smooth surface.

Sealing sleeve made of EPDM for drinking water or NBR for gas (DIN DVGW) approved.

Sealing tape, bridge and threaded bolt made of stainless steel 1.4301 (V2A) similar to AISI 304.

 

Data

Artikel-Nr.Durchmesser
bereich
[mm]		Baulänge

[mm]
RDS.M.404440 - 44100
RDS.M.485248 - 52100
RDS.M.586558 - 65100
RDS.M.758375 - 83100
RDS.M.879587 - 95100
RDS.M.108118108 - 118100

Der Beitrag Pipe Repair Sealing Clamp – Medium erschien zuerst auf SuS GmbH Schwerin.

]]> Pipe Repair Sealing Clamp – Short https://susgmbh.de/en/product/pipe-repair-sealing-clamp-short/ Mon, 19 Apr 2021 12:22:17 +0000 https://susgmbh.de/product/pipe-repair-sealing-clamp-short/ Properties

  • Strong honeycomb structure of the sealing sleeve (EPDM, KTW approved) for better compensation of unevenness in the pipe
  • Length 60 mm
  • Temperature +90°C for water
  • Pressure 10 bar for water
  • Scope of delivery: sealing tape, bridge and threaded bolt made of stainless steel
  • easy assembly and low weight

 

Areas of application

  • a system for sealing holes, cracks and porous areas in water pipes
  • only for the cold water area
  • particularly suitable for cast iron pipe, PE pipe and PVC pipe
  • versatile
  • quick repairs of steel, cast iron and asbestos cement pipes

Der Beitrag Pipe Repair Sealing Clamp – Short erschien zuerst auf SuS GmbH Schwerin.

]]> Description

Pipe repair sealing clamps are suitable for sealing holes, cracks and porous areas in water-carrying pipes with a smooth surface.

The strong honeycomb structure of the sealing sleeve (EPDM, approved for drinking water) helps to better compensate for unevenness in the pipe.

It is easy to install the pipe rupture sealing clamps in installation situations with limited space (7 mm is sufficient!).

 

Data

Artikel-Nr.Durchmesser
bereich
[mm]		Baulänge

[mm]
RDS.K.212521 - 2560
RDS.K.263026 - 3060
RDS.K.333733 - 3760
RDS.K.424542 - 4560
RDS.K.485148 - 5160
RDS.K.555855 - 5860
RDS.K.606460 - 6460
RDS.K.748074 - 8060
RDS.K.879387 - 9360

Der Beitrag Pipe Repair Sealing Clamp – Short erschien zuerst auf SuS GmbH Schwerin.

]]> Ball Valve IT/ET 1″ https://susgmbh.de/en/product/ball-valve-it-et-1/ Mon, 19 Apr 2021 12:15:16 +0000 https://susgmbh.de/product/ball-valve-it-et-1/ Properties

  • Body: Nickel-plated brass
  • Ball: Chrome-plated brass
  • with lever handle
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag Ball Valve IT/ET 1″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

The ball valve is a specially designed fitting that is usually used as a shut-off valve in pipelines through which liquids or gases (water, oil, compressed air) flow – especially in pipes with a large diameter. This allows the flow to be completely shut off.

Der Beitrag Ball Valve IT/ET 1″ erschien zuerst auf SuS GmbH Schwerin.

]]> Ball Valve IT/ET 1/2″ https://susgmbh.de/en/product/ball-valve-it-et-1-2/ Mon, 19 Apr 2021 12:14:43 +0000 https://susgmbh.de/product/ball-valve-it-et-1-2/ Properties

  • Body: Nickel-plated brass
  • Ball: Chrome-plated brass
  • with lever handle
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag Ball Valve IT/ET 1/2″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

The ball valve is a specially designed fitting that is usually used as a shut-off valve in pipelines through which liquids or gases (water, oil, compressed air) flow – especially in pipes with a large diameter. This allows the flow to be completely shut off.

Der Beitrag Ball Valve IT/ET 1/2″ erschien zuerst auf SuS GmbH Schwerin.

]]> Ball Valve IT/ET 1/4″ https://susgmbh.de/en/product/ball-valve-it-et-1-4/ Mon, 19 Apr 2021 12:13:48 +0000 https://susgmbh.de/product/ball-valve-it-et-1-4/ Properties

  • Body: Nickel-plated brass
  • Ball: Chrome-plated brass
  • with lever handle
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag Ball Valve IT/ET 1/4″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

The ball valve is a specially designed fitting that is usually used as a shut-off valve in pipelines through which liquids or gases (water, oil, compressed air) flow – especially in pipes with a large diameter. This allows the flow to be completely shut off.

Der Beitrag Ball Valve IT/ET 1/4″ erschien zuerst auf SuS GmbH Schwerin.

]]> Ball Valve IT/IT 1″ https://susgmbh.de/en/product/ball-valve-it-it-1/ Mon, 19 Apr 2021 12:13:03 +0000 https://susgmbh.de/product/ball-valve-it-it-1/ Properties

  • Body: Nickel-plated brass
  • Ball: Chrome-plated brass
  • with lever handle
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag Ball Valve IT/IT 1″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

The ball valve is a specially designed fitting that is usually used as a shut-off valve in pipelines through which liquids or gases (water, oil, compressed air) flow – especially in pipes with a large diameter. This allows the flow to be completely shut off.

Der Beitrag Ball Valve IT/IT 1″ erschien zuerst auf SuS GmbH Schwerin.

]]> Ball Valve IT/IT 1/2″ https://susgmbh.de/en/product/ball-valve-it-it-1-2/ Mon, 19 Apr 2021 12:12:22 +0000 https://susgmbh.de/product/ball-valve-it-it-1-2/ Properties

  • Body: Nickel-plated brass
  • Ball: Chrome-plated brass
  • with lever handle
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag Ball Valve IT/IT 1/2″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

The ball valve is a specially designed fitting that is usually used as a shut-off valve in pipelines through which liquids or gases (water, oil, compressed air) flow – especially in pipes with a large diameter. This allows the flow to be completely shut off.

Der Beitrag Ball Valve IT/IT 1/2″ erschien zuerst auf SuS GmbH Schwerin.

]]> Ball Valve IT/IT 1/4″ https://susgmbh.de/en/product/ball-valve-it-it-1-4/ Mon, 19 Apr 2021 12:11:11 +0000 https://susgmbh.de/product/ball-valve-it-it-1-4/ Properties

  • Body: Nickel-plated brass
  • Ball: Chrome-plated brass
  • with lever handle
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag Ball Valve IT/IT 1/4″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

The ball valve is a specially designed fitting that is usually used as a shut-off valve in pipelines through which liquids or gases (water, oil, compressed air) flow – especially in pipes with a large diameter. This allows the flow to be completely shut off.

Der Beitrag Ball Valve IT/IT 1/4″ erschien zuerst auf SuS GmbH Schwerin.

]]> MINI-Ball Valve IT/ET 1/8″ https://susgmbh.de/en/product/mini-ball-valve-it-et-1-8/ Mon, 19 Apr 2021 12:10:39 +0000 https://susgmbh.de/product/mini-ball-valve-it-et-1-8/ Properties

  • Material: Nickel-plated brass
  • with hand lever
  • Operating pressure: max. 20 bar
  • Temperature range: -10 to +80°C (depending on operating pressure)

 

Areas of application

  • for installations in the heating and industrial sectors

Der Beitrag MINI-Ball Valve IT/ET 1/8″ erschien zuerst auf SuS GmbH Schwerin.

]]> Description

Mini ball valves are used wherever the line needs to be shut off in a pipe or hose line system. Both gaseous and liquid volume flows can be shut off by turning the handle by 90°.

Der Beitrag MINI-Ball Valve IT/ET 1/8″ erschien zuerst auf SuS GmbH Schwerin.

]]>