The rubberized dowels are made of high-quality natural rubber with an integrated plastic dowel. The plugs can achieve a noise level reduction of up to 16 dB(A). Wood screws can be used to fasten the objects.

The rubberized anchors are the ideal accessory for mounting trusses, machines and much more quickly and reliably on a wall. Both the suspension and the support of noise-intensive and noise-generating machines, systems and devices are vibration-isolated and vibration-damped. At the same time, the dowels also reduce vibrations, which reduces the transmission of structure-borne noise and increases the effectiveness of sound absorption in the low-frequency range.

Areas of application are basically anywhere where the reduction of material vibrations is required, such as in the vicinity of systems, devices or machines that generate structure-borne noise. The plugs are used for mounting loudspeakers, gas boilers, boilers, wall clocks and pipes, among other things. They are also used to fasten sheets, housings and cladding. These often tend to be excited by vibrations and, like a membrane, pass these on to the environment as noise.

On stone walls with a thickness of 10 to 30 cm, sound level reductions of up to 20 dBA were achieved experimentally from one side of the wall to the other.

Data

Der Beitrag Rubberized dowel erschien zuerst auf SuS GmbH Schwerin.

The elastic wall mounting set is ideal for reducing noise in adjacent areas and rooms. The set consists of 2 elastic wall plugs, 2 elastic wall brackets and 2 plastic plugs including screws. The objects to be fastened are fixed to the wall above with the two elastic wall plugs. At the lower end, the objects are supported by the elastic wall bearings.

The elastic wall plugs and elastic wall bearings are made from high-quality natural rubber. This guarantees safe and flawless operation.

The elastic wall mounts are the ideal accessory for mounting trusses and machines quickly and reliably on a wall. At the same time, the dowels also reduce vibrations, prevent the transmission of structure-borne noise and thus increase the effectiveness of sound absorption in the low-frequency range. In principle, they can be used wherever material vibrations need to be reduced, for example in the vicinity of systems, appliances or machines that generate structure-borne noise. Elastic wall mounting is used, for example, for mounting loudspeakers, flat screens, gas boilers, boilers, wall clocks and pipes. They are also used for fastening sheet metal, housings and cladding. These often tend to be excited by vibrations and transmit these as noise to the surroundings like a membrane.

Experiments on stone walls of 10 to 30 cm thickness have shown sound level reductions of up to 20 dBA from one side of the wall to the other.

No liability is accepted for improper use.

Data

Der Beitrag Elastic wall bearing erschien zuerst auf SuS GmbH Schwerin.